Information Hazardous Electrical Work Approval table Qualified Electrical Workers (QEWs) Qualified Electrical Worker Observers APS Designated Electrical Equipment Inspectors APS DEEI Inspection Request Current Nationally Recognized Testing Laboratories ANL Electrical Safety Manual Argonne Forms ANL-1204 - Electrical Job Briefing (Mode 1 or Mode 2) ANL-1205 - Electrical Safety Field Observation Checklist Field Guide 1: What is “Electrical Work”? Field Guide 2: Field Inspection of Arc Flash PPE Field Guide 3: Field Inspection and Testing of Rubber-Insulating Glove Field Guide 4: Performing a Shock Hazard Analysis Field Guide 5: Performing a Flash Hazard Analysis Field Guide 6: Performing a Job Briefing Field Guide 7: Inspection and Testing of Multi-Meters Field Guide 8: Inspection and Testing of Hot Sticks Field Guide 9: Switching Requirements Field Guide 9A: Non-Hazardous, Non-QEW Switching Requirements Field Guide 10: Second Person (Safety Watch vs Standby Person) Field Guide 11: Controlling Hazardous Energy Thresholds Field Guide 12: Controlling Hazardous Energy Sources on Equipment Field Guide 14: QEW Job Planning Reference Sheet Field Guide 15: Complex LOTO Field Procedure Form Field Guide 20: Use, Inspection and Storage of Electrical Extension Cords Field Guide 21: Proper Application and Use of Relocatable Power Taps Field Guide 23: Inspecting an Office for Electrical Safety
