APS Designated Electrical Equipment Inspectors

APS Designated Electrical Equipment Inspectors
Inspector Division Phone Email Focus Area
Steve Bogdan AES-EFOG 2-0800 [email protected] 438 FC/Entire Ring if Needed
Bruno Fieramosca AES-EFOG 2-0201 [email protected] 432 FC/Entire Ring if Needed
Clay White AES-EFOG 2-0300 [email protected] 433 FC/Entire Ring if Needed
Tim Smith AES-EFOG   [email protected] Entire Ring if Needed
Steve Corcoran XSD 2-0671 [email protected] Sector 23
Alex Deriy XSD 2-7681 [email protected] 2-BM, 32-ID
Alex Lavens XSD 2-0642 [email protected] Sector 19
Mike McDowell XSD 2-6422 [email protected] Sectors 4, 6, and 29
Mike Pape XSD 2-0591 [email protected] 9-BM, 20-BM, 20-ID, 18-ID
Alexis Quental XSD 2-2509 [email protected] 9-ID-C, 12-BM-B, 12-ID-B,C
Rogelio Ranay XSD 2-6031 [email protected]  
Lynn Ribaud XSD 2-6833 [email protected] Sector 11
Eric Rod XSD 2-0412 [email protected] Sector 16
Rick Spence XSD 2-2797 [email protected] Sector 11, 17-BM
Ray Ziegler XSD 2-5527 [email protected] 7-BM, 7-ID, 8-ID
Pasquale Di Donna PSC-USR 2-0428 [email protected] Sectors 13, 14, and 15
Jay Von Osinski PSC-USR 2-0620 [email protected] Sectors 5 and 21
Tom Walsh XSD 2-5651 [email protected]  
John Burke AES 2-6025 [email protected]  
Ray Davis AES 2-5072 [email protected]  
Phil McNamara AES 2-9836 [email protected]  
Wayne Michalek AES 2-6025 [email protected]  
Adam Brill ASD 2-9968 [email protected]  
Alex Cours ASD 2-4550 [email protected]  
Chuck Doose ASD 2-6037 [email protected]  
Bill Guszczo ASD 2-9695 [email protected]  

To contact the APS DEEIs please use [email protected]

All APS User electronic and electrical equipment must be inspected before use in an experiment. Please ask your beamline to make arrangements with one of the inspectors listed above.

Reviewed: December 20, 2022